Filter
Top Products
Troubleshooting
No color or intermittent
color
● If you are using a non-VESA-DDC standard video card,
turn the DDC1 / 2B feature Off.
Color appears blotchy
● The picture may need degaussing.
● Remove any nearby magnetic objects.
● Face the monitor toward the East for the best picture
quality.
Missing one or more
colors
● Check the Color Temperature.
● Make sure the monitor cable is properly connected to your
computer.
● Check to see if the monitor cable has bent pins.
Dim Picture
● Adjust the Brightness and Contrast controls.
● Check your video card and it's owner's manual instructions
for it may be a non-VESA-DDC Standard card.
Picture is too large or
too small.
● Adjust the Horizontal and/or Vertical Size.
● Adjust the Zoom.
Edges of the picture
are not square.
● Adjust the geometry.
Picture has a double
image.
● Eliminate the use of a video extension cable and/or video
switch box.
● Face the monitor toward the East for the best picture
quality.
Picture is not sharp.
● Check to make sure Moiré is switched off.
● Adjust Sync Input.
Unstable Picture
● Increase your refresh rate.
Problem with On
Screen Display
● Refer to the instructions and troubleshooting information in
that chapter.
file:///D|/EDFU/crt_19_5/edoc/english/202P/SAFETY/saf_troub.htm (2 of 3)2005-04-21 ¤W¤È 09:42:17