Filter
Top Products
10
LCD DISPLAY
The display provides the following information:
Charging Indicator
As soon as you connect cord, the light in display area
goes ON, the plug symbol appears and the minute
indicator starts blinking.
Full Charge Indicator
When batteries have been fully charged,“FULL” scrolls
across the display and light in display starts blinking.
Minutes Left Indicator
The number on the display shows remaining shaving time
in minutes.The “squares” in the charge meter indicate
how much power is still left in batteries.
Low Battery Indicator
When the batteries are running low, the plug symbol will
blink after you have turned the razor OFF. If this occurs
while shaving, you should have enough power to
complete your shave.
When you turn razor ON or OFF,the light in the LCD
Display will come ON for approximately 10 seconds.
The razor has a 1-minute demonstration program that
will run through the full display of razor functions.To
activate, press and hold the ON/OFF button in for a few
seconds until all symbols appear on the display.You can
interrupt the demonstration by pressing the ON/OFF
button again.