Filter
Top Products
4 EN
3 Get started
Always follow the instructions in this chapter in
sequence.
Connect power
Caution
• Risk of product damage! Ensure that the power voltage
corresponds to the voltage printed on the back or
underside of the unit.
• Risk of electric shock! When you unplug the AC
adapter, always pull the plug from the socket. Never
pull the cord.
Connect the power adapter to the wall outlet.
Turn on
Press .
» The Bluetooth indicator begins to
blink.
Switch to standby mode
Press again to switch the docking speaker to
standby mode.
» The Bluetooth indicator turns off.
Set time
1 In standby mode, press and hold CLOCK/
NIGHT LIGHT for two seconds to
activate clock setting mode.
» [24H] begins to blink.
2 Press +/- to set the 12/24 hour format.
3 Press CLOCK/NIGHT LIGHTtoconrm.
» The hour digits begin to blink.
4 Repeat steps 2 to 3 to set the hour and
minute.
» The set time is displayed.
Adjust brightness of display
panel
In standby mode, press CLOCK/NIGHT
LIGHT repeatedly to adjust the brightness of
the display panel: high, medium, or low.
Adjust brightness of night
light
1 Press to turn on the speaker.