Philips FM01SW80 Computer Drive User Manual


 
Microsoft
®
Windows
®
Vista, XP, 2000, ME or MACOS 9.0 or higher:
The USB memory key driver is installed automatically when the drive is connected to a USB port of
the computer. However, with some USB 2.0 cards or boards, you may need to initiate installation
manually. In this case, follow the on screen instructions to search for a suitable driver. Refer to the
operating system's Help file if you need any help.
Note: Do not remove the USB memory key from the computer USB port as long as the download process
is in progress.
Windows 98SE:
1 Download the device driver at www.active-crystals.com.
2 Insert the memory key USB connector into one of the computer’s USB ports.
> The New Hardware wizard starts.
3 Click the Next button.
4 Click Search for the best driver for your device. Then click the Next button.
5 Click Specify a location. Then click the Browse button.
6 When the dialog box appears, specify the folder where the installation program is stored.
7 Click the OK button to close the dialog box. Then click the Next button.
8 Click the Next button.
9 Click the Finish button.
> Installation of the driver starts.
> Once the installation process is complete, a drive icon for the USB memory key appears in the
My Computer window.
10 After confirming that the drive is in standby mode you can remove the drive from the computer’s
USB port.
6
EN
Install