Filter
Top Products
1) Connect the power cord to the back of the monitor firmly. (Philips has pre-connected
VGA cable for the first installation.
2) Connect the cables to the back of your computer by following these steps:
(a) Turn off your computer and unplug its power cord.
(b) Connect the monitor signal cable to the video connector on the back of your computer.
(c) Plug the power cord on your computer and your monitor into a nearby outlet.
(d) Connect the PC audio cable to the audio connector on the back of your computer.
(e) USB plug
(1) Connect USB upstream port on monitor and the USB port on PC with a USB cable.
(2) The USB downstream port is now ready for any USB device to plug in.