Filter
Top Products
EN
11
Connect a network device (option A2+)
1 When you want to enable personal security on the powerline ethernet network,
write down the Product ID code (for example, WQH7-E2JU-3QLH-YBRY).
Refer to ’Secure’ on page 11.
2 Take the network cable.
3 Plug the connector of the network cable into the network port of the network
device.
4 Plug the other connector of the network cable into the network port of the
powerline ethernet adapter.
5 Plug the powerline ethernet adapter into the power supply.
>The PL-LINK light comes on.
Secure
Introduction
You can enable and disable personal security of the data transmissions with the security
CD and a computer with one of these operating systems:
• Microsoft Windows® 2000
• Microsoft Windows® XP
Examples of network devices are: games consoles, multimedia adapters and network
attached storages.
AC
AC
25
34
Ethernet
To enable personal security, drivers must be installed. These drivers communicate
with the powerline ethernet adapters.
The default security code is: HomePlug.