Filter
Top Products
18 Philips · PPX2230 · 2330
7Settings
1 Switch the device on using the on/off switch on the
side.
2 After the initial screen the main menu appears.
3
Use the navigation keys to select
Settings
.
4 Confirm with à.
5 Use ¡/¢ to select from the following settings.
6 Confirm with à.
7 Modify the settings using à, ¡/¢,
8 Confirm with à.
The ¿ key takes you one step back in the menu.
Image settings
Wall paper—Select background images
Fit Screen—Convert videos and images original, opti-
mal, zoom mode.
Projection mode
Front—Normal projection; the device is located in
front of the projection surface/screen.
Rear—Rear projection; the device is located behind
the projection surface; the image is horizontal mir-
rored.
Ceiling—The device is hanging from the ceiling in an
upside-down position; the image is rotated by 180
degrees.
Rear ceiling—The device is hanging from the ceiling
in an upside-down position behind the projection
surface; the image is rotated by 180 degrees and hor-
izontal mirrored.
Wall color correction—Colour correction of the pro-
jected image to adjust to coloured projection surfaces
Smart Settings—Select predefined settings for bright-
ness / contrast / colour saturation. If you modify these
settings, the setting is switched to Manual.
Brightness—Adjust brightness
Contrast—Adjust contrast
Saturation—Adjust colour saturation
Sound Settings:
Volume—Adjust the volume
Key beep—Turn key tones on and off
Video settings
View—Display all videos in a list or a corresponding
folder structure on the drive.
Repeat—Set the repeat type for video files: Repeat
deactivated (Off), repeat all videos in a directory
(Directory), repeat only the current video (Movie),
repeat all videos (All).
Resume play—If this function is activated, playback will
continue at the position it was last stopped. If deacti-
vated, playback will always start at the beginning of the
video.
Music settings
View—Show all songs in a list or a corresponding folder
structure on the drive.
Scr
een—Activate or deactivate the projection during
playback.
Repeat—Set the repeat type for music files: Repeat
deactivated (Off), repeat all songs in a directory (Direc-
tory), repeat only the current song (Song), repeat all
songs (All).
Shuffle—Activate this function for random playback.
Otherwise, playback will take place in sequence.
Picture settings
View—Display the images as a thumbnail or as a list
during selection in the main menu.
Time per slide—Image viewing time during slide show
Repeat—Set the type of repeat for slide show photos:
Repeat off (Off), repeat all photos in the directory
(Directory), repeat all stored photos (All).
Slide transition—Set image transitions
Slideshow order—Play slide show in order or ran-
domly
Power Save
Eco mode—This function reduces the light output in
order to increase the operating time for the built-in bat-
tery. When operating from the power supply, the
energy saving mode is always deactivated in order to
ensure the best-possible image display.
Sleep mode—With this function, the projector auto-
matically shuts down after a specified period of time or
at the end of a movie.