Filter
Top Products
Important information
– Only use batteries of the same type.
– Dispose of the batteries in an environmentally
friendly way.
– Do not mix old and new batteries.
– Do not mix different types of batteries: alkaline,
standaard or rechargeable batteries.
– If the product is not used for a long period,
remove the batteries. Leakage can cause damage
of the product.
– Do not recharge non-rechargeable batteries.
– Empty batteries need to be removed from the
product.
– Do not short-cut the battery connection points.
– Install all batteries correctly, + and - as marked on
the unit.
– Do not mix old and new batteries or carbon and
alkaline, etc.
– Remove batteries when the unit is not used for a
long time.
– Batteries contain chemical substances, so they
should be disposed of properly.
ENGLISH 7
How to use the In-Touch Address Recorder
• Attach the In-Touch Address Recorder to your
child’s belt,jacket, etc.
• Make sure that the product is clearly visible
with the red SOS/ADDRESS button (2) at the
front.
Al
ways check the recording before you use the
product. If sound quality is not good anymore,
replace the batteries.
Replacing the batteries
The In-Touch Address Recorder comes with 4 A76P
type batteries.When replacing the batteries you can
also use regular A76 batteries.These batteries,
however, may have a shorter lifetime.
1 Unscrew the screw at the back of the product.
2 Remove the back cover.
3 Remove the empty batteries.
4 Insert the new batteries.
Pay attention to the polarity of the batteries.
5 Put the back cover back in place.
6 Tighten the screw.
ENGLISH6
XP SBC SC 605 14-02-2003 15:27 Pagina 6