Filter
Top Products
EN
20
Problem Possible cause Solution
NETWORK CONNECTION PROBLEMS
If the Link LED on PC or other network Make sure the computer and other
the Wireless USB devices switched off. network devices are receiving power.
Adapter 11g True
Turbo 108 Mbps does
not light, or if you
cannot access any
network resources
from the computer.
No access to a Service unavailable. Check that you have enabled and
Windows or Net- configured the service correctly.
Ware service on the If you cannot connect to a particular
network. server, be sure that you have access
rights and a valid ID and password.
If you cannot access the Internet, be
sure you have configured your system
for TCP/IP.
If your wireless Base Station / Access Make sure the access point that the
adapter cannot Point is switched off. station is associated with is powered
communicate with a on.
computer in the
network when Range too long Reposition your Wireless Adapter.
configured for (weak radio signal).
Infrastructure mode.
Wrong settings. Make sure the SSID and the network
encryption key are the same as those
used by the wireless access point.
Network speed USB 1.1 port used Connect the wireless adapter to a
does not in stead of USB 2.0. hi-speed USB 2.0 port for maximum
exceed 11 Mbps. speed.
Other network Make sure all network components
components are are suitable for high network speeds.
unsuitable for higher
network speeds.