Filter
Top Products
MPC-12R
6
Rev. 07/06
Ph:800-421-6511
www
.picomacom.com
Operation and Controls
Front and Rear Views
1. MPCD: Demodulator accepts any NTSC television signal from 54 to 806 MHz and converts it to baseband video and
audio.
2. MPCMA: Modulators are fully agile from 54-860 MHz, including HRC and IRC offsets. The MPCMA is also adjacent
channel capable.
3. MPCM45: Modulators are factory re-tunable within band. They provide adjacent channel capability for VHF channels
2-ZZZ, UHF channels 14-69 and cable channels 2-125, including HRC and IRC offsets.
4. MPC-HSS Power Supply: Hot swappable redundant power supply supplies, provides +12 Vdc and +5 Vdc to the mod-
ulators and demodulators. MPC-HSR power supply input will operate from 90 to 264 Vac.
5. Power Supply Power Distribution Bracket: This device provides the interface for the MPC-HSS power sup-
plies and the MPCM45, MPCMA
and MPCD modules.
6
Power Cables:
Easily removable cables provide DC voltage from MPC-HSR power supply to the MPC-12R modules.
"Home-run" configuration allows removal of modules without disabling entire system.
MPC12R.qxd 7/7/06 10:46 AM Page 6