30
• IP Static Routes
• IP Default Route/Router
RV: Use the WAN/IP screen to set RIP, and the IP Static Routing Window (All -
IP) to set static routes and a default route/router.
CL: Use interface(misc) and then ip flags(set) to set RIP, and ip route(add) to add
static routes and a default route/router.
IPX Protocol
Required for IPX
Frame Relay operation requires that the WAN interface is set to be a “numbered
interface.” This means that the interface (and thus the Frame Relay network) must
have an IPX network number.
• IPX numbered interface
• IPX Network Number
RV: Use the WAN - IPX screen.
CL: Use interface(misc) and then ipx wan(set).
Suggested for IPX
The settings above are all that is generally required for IPX operation over Frame
Relay.
AppleTalk Protocol
Required for AppleTalk
Frame Relay operation requires that the WAN interface is set to be a “numbered
interface.” This means that the interface (and thus the Frame Relay network) must
have an AppleTalk network number and the interface must have an AppleTalk node
number.
• AppleTalk numbered interface
• AppleTalk Network Number
• AppleTalk Node Number
RV: Use the WAN - AppleTalk screen.
CL: Use interface(misc) and then appletalk wan(set).