Controls of Bluetooth audio
Fast forward/reverse
*
When selecting BTAUDIO
as a source, keep touching c
or d.
Select a function
When selecting BTAUDIO
as a source, touch AV
MENU and then touch
FUNCTION.
Pause a song
When selecting BTAUDIO
as a source, touch abin
FUNCTION1.
Put the unit in
C.OPEN mode
When selecting BTAUDIO
as a source, keep touching
ab in FUNCTION1.
Play songs
When selecting BTAUDIO
as a source, touch abin
FUNCTION2.
Put the unit in DIS-
CONN. mode
When selecting BTAUDIO
as a source, keep touching
ab in FUNCTION2.
Switch between
AUTO and MANUAL
When selecting BTAUDIO
as a source, touch cor d in
AUTO/MANUAL (A/M).
Note
When using as an external unit, this unit doesn't
automatically return to the original source after a
phone call. Select a desired source manually
after a phone call.
Connecting a cellular phone
To use a phone wirelessly with this unit, it is
necessary first to establish a connection using
Bluetooth wireless technology.
! Connection is normally established by HFP,
which gives you a full control of functions
available on the telephone source. How-
ever, in some cases when you make con-
nection from your cellular phone, the
connection may be made by HSP and sev-
eral functions may not be available.
! A phone may be connected via Bluetooth
wireless technology but not yet registered
with this unit. In this case it is said to be
temporarily connected, and the available
features are limited. To take full advantage
of all the features available, we recommend
you register your phone with this unit.
Refer to Registering connected cellular
phone on the next page for more on this.
! If this unit is used as an external unit, this
unit does not search for available cellular
phones. Use your cellular phone to estab-
lish connection.
Using a cellular phone to
initiate a connection
Putting the unit in C.OPEN mode allows you to
establish a Bluetooth wireless connection
from your phone. You may need to refer to the
operation manual that came with your phone
if you are unsure how to initiate a connection
from your phone.
1 Put the unit in C.OPEN mode
Refer to Function compatibility charts on page
26.
# Before you put the unit in C.OPEN mode
NO TEL is displayed.
2 Use cellular phone to connect to this
unit.
When the connection is established, TEL is
displayed.
# Operation varies depending on the type of
your cellular phone. Refer to the instruction man-
ual that came with your cellular phone for de-
tailed instructions.
# You may need to enter the link code on your
cellular phone to complete the connection.
* You can use this function when you select MANUAL in AUTO/MANUAL (A/M).
Operating with different
head units
En
30
Section
05