Pioneer PRO-101FD Computer Monitor User Manual


  Open as PDF
of 2
 
PIONEER, ELITE, and the Pioneer and Elite logos are registered trademarks of Pioneer Corporation.
Specifications and design subject to modification without notice.
Plasma Display Systems display images consisting of hundreds of thousands of minute pixels (light emit-
ting cells), and there is a possibility that some pixels may be inactive, flashing or continually illuminated.
Plasma Display Systems are made of glass; be sure to secure it from damage from impact.
Plasma Display Systems, while in use, may generate some functional sounds, for example: fan motor
noise, and electrical circuit humming/glass panel buzzing.
All phosphor-based display systems (CRT Television Systems—both direct view and projection televi-
sions—as well as plasma display systems) may develop image retention, sometimes called burn-in if
permanent. Recommended guidelines are as follows:
Do not display still images for long periods (such as fixed images from PC or TV game equipment, and/or
time of day indicator or channel logo display).
Do not display content in the 4:3 aspect ratio (black or gray bars on left and right side of content) or
letter-box content (black bars above and below of content) for extended periods of time, or use either of
these viewing modes repeatedly within a short period of time. This Plasma Display System is equipped
with multiple wide-screen viewing modes; use one of these screen modes to fill the entire screen
with content.
Displaying dark images after displaying still images for a period of time may cause image retention. In
most cases, the image retention can be corrected by displaying bright images for a similar period of
time. However, if your Plasma Display System displays still images for additional long periods of time,
image retention may be irreparable.
Plasma Display Systems emit slight amounts of IR (Infrared) emission through luminous discharge technol-
ogy. This IR emission is not harmful to living organisms, but may interfere with the operation of remote
controls for other equipment, or cause static in equipment using IR signals (such as cordless headphones
or cordless microphones).
HDMI and the HDMI logo are registered trademarks of HDMI Licensing, LLC.
© 2008 Pioneer Electronics (USA) Inc.
UltRa-slim PROFile
wall mOUnt (KRP-wm02)
Specically designed to preserve the PRO-101FD’s slim design ›
when wall-mounted (optional – sold separately)
integRateD tecHnOlOgiesViDeO PROcessing
tecHnOlOgy
Picture Detail Settings – DRE Picture, Black Level, ACL, Enhance ›
Mode, Gamma and CTI
Noise Reduction Setting – 3 DNR, Field NR, Block NR,
›
Mosquito NR
Color Detail Settings – Color Temperature (5 Pre-settings or
›
Manual adjustment), CTI, Color Management
3DYC (Off / High / Mid / Low)
›
IP Mode (1 / 2 / 3) ›
Drive Mode (1/ 2 / 3) ›
ViDeO & aUDiO cOnnectiVity
Inputs ›
4 Independent HDMI 1.3 –
1 DVI w/HDCP –
1 Component –
1 Composite –
1 RS-232C –
LAN (10/100 Base-T Ethernet) for IP Control –
PC –
Output ›
IR Repeater –
PRODUct DimensiOns
Panel (W x H D): 48-17/32” x 28-15/32” x 2-17/32” ›
Panel Weight: 69.2 lbs. (31.4 kg) ›
ELITE
®
KURO™ SIGNATURE SERIES
PRO-101FD
50-Inch Class (49.85” Diagonal)
High-Definition Flat Panel Monitor
 previous