Pioneer RMS-V4011/V5011 Projector Accessories User Manual


 
36
4 Projection Screen Kit (RMS-V4011/V5011)
* Projection screen kit is double-packaged to maintain its performance. After removing the middle cover protecting its screen,
make sure the screen does not get scratched or dirty.
[1] Remove the top cover.
[2] Remove the band securing the middle cover and remove the middle cover.
[3] Gently peel off the black tape pasted at the four sides of the screen.
Be careful not to damage the lenticular sheet.
[4] Take out the screen unit from the box and stand it on a flat floor, paying attention to its top and bottom.
[5] Remove the eight screws for transportation (gold), four protection panels, white sheet at the back of the screen, and the
bag containing accessories attached to the top of the frame.
* The protection panel is attached with the transportation screws. Keep the removed panel if required. When storing
the system, do not remove the outermost protection panel.
[6] When opening the packagings of several units first, after opening them, place them in a different place to protect them
from damage, and place a sheet over them to protect them from dusts.
[5]
[3]
[2]
[4]
[1]
Black tape
Flat floor
Middle cover
Instruction manual
(Fig.3-8)
Top cover
Band
Bag containing
accessories
Top
Right side
Bag containing
accessories
White sheet
Transportation screws (Eight:Gold)
Protection panel
INSTALLATION AND ASSEMBLY