NOTE:
THE METER IS SHIPPED WITHOUT POSTAGE.
You transfer funds to the meter as part of the setup process
mailstation 2™ CD Installation
Set-up: Using PC
mailstation™
Application CD
1
If your PC has an Internet connection:
Place the mailstation 2™ CD
into the CD ROM drive.
Follow the instructions on your computer.
Download the software from:
http://support.pb.com/K7M0
✗
If you do not have a PC with an internet connection
If you cannot use the installation CD:
Turn to Set-up for Analog Phone Line Use on page 11.
1
Please do not apply power to your
mailstation 2™ until instructed to.
2
Preparing your computer
First the mailstation 2™ Quick Install Software checks your
system for two things:
- Does it meet the minimum requirements
- Does it have the software components needed to run PC Meter
Connect™. The Quick Install Software will then add any missing
components. This process may take several minutes to complete.
NOTE: Administrative privilages may be required
before you can install the software on your system.