Filter
Top Products
Locating the Rate Chart
1. Hold the scale in one hand with the bottom facing up.
2. Place your other hand on the bottom center plate and slide the plate out
toward the front of the scale to expose the ratechart.
EE
EE
E
0 0 . 0
Note: The scale enters sleep mode after a few
minutes of inactivity. To awaken it, touch the
platter.
Note: When using the scale with the
ClickStamp
™
product, the rate chart
is not necessary. ClickStamp
automatically calculates the postage
amount when you enter the weight
in the postage calculator window.
Calculating Postage
1. Press the On/Zero key. The scale displays .
2. Place a mailpiece on the scale.
3. Turn the wheel on the rate chart to the weight indicated.
If the weight of the mailpiece falls between two weight
limits on the chart, you must apply postage for the
higher weight.
For example, if the item weighs 2.1 oz., you must
apply postage for 3.0 oz.
Clearing Overweight and Underweight
Conditions
• Weighing any item of more than five pounds causes the scale to display
(error), indicating the weight of the item exceeds the scale’s weighing capacity.
Remove the overweight item and continue with the next mailpiece.
• If a negative weight displays at any time, remove all items from the scale and
press the On/Zero key to reset the scale.
Note: Pressing the On/Zero key with weight on the scale causes the
scale to set to zero and display a negative weight when you remove the
item. Press the On/Zero key again to reset.
3