Planar C3i/EX Computer Monitor User Manual


 
8 | Dome Display
Connect the Video and Power Cables
Turn your computer off. Leave the power cord plugged into
the grounded outlet. Use the Dome display with the power
adapter and video cable shipped.
For the Dome E2 display, use power adapter Ault MW116KA1249F53.
For the Dome C3i, Dome E3, Dome E3c, and Dome E5 displays, use
power adapter Ault MW122RA1223F52.
To connect the cables
1 Plug one end of the DVI cable into the DVI port on the interface
plate. Secure the connection.
2 Plug the power cord into the power input port on the
interface plate.
3 Plug the other end of the DVI cable into the Video 1 port on
the installed display controller. (Use the Video 1 port for a single
display installation or for the first display of a dual setup; see
page 6.) Secure the connection. Use the other port to connect
a second display.
4 Plug the other end of the power cord into the power supply.
5 Plug the power supply cord into a grounded AC outlet.
Power supply and DVI cable
connections on Dome C3i display.
Power supply and DVI cable
connections on Dome EX display.