Filter
Top Products
Planar User’s Manual
8
Auto Adjust Procedure
Pressing the Adjust key while the Auto Adjust topline menu is selected, activates the Auto Adjust procedure. The Auto Adjust procedure
takes approximately 2 seconds to complete. Once finished, the OSD menu will disappear after a short time-out period.
The Monitor- Control Option
Pressing the Adjust key while the Monitor Control icon is selected activates the Monitor Control submenu. Use the
◄Function►
select
buttons to scroll between the submenu items. You should only use this menu item if the results of the Auto Adjust function are not
satisfactory.
H-Position: Press the
Adjust buttons to horizontally move the display image to the desired position.
V-Position: Press the
Adjust buttons to vertically move the display image to the desired position.
Phase: Press the
Adjust buttons to fine-tune the displayed image. An improper phase adjustment will result in
pixel jitter or display noise.
Clock: Press the
Adjust buttons to stabilize the display clock timing. An improper clock setting will result in wide
vertical bands on the display.
Reset: Press the Adjust
button to reset the Monitor-Control submenu values to the factory default values.
Exit: Press the Adjust
button key to exit the Monitor-Control submenu.
OSD - Control Option
Pressing the Adjust key while the OSD Control icon is selected activates the OSD Control submenu. Use the ◄Function►
select
buttons to scroll between the submenu items.
OSD-H-Position: Press the
Adjust buttons to horizontally move the OSD menu.
OSD-V-Position: Press the
Adjust buttons to vertically move the OSD menu.
Exit: Press the Adjust
button key to exit the OSD-Control submenu.
Misc. - Control Option
Pressing the Adjust key while the Misc Control icon is selected activates the Misc Control submenu. Use the
◄Function►
select
buttons to scroll between the submenu items.
Language: Press the
Adjust buttons to select the desired OSD display language. Languages supported: English, German,
French, Spanish, and Italian.
Audio Volume: Press the
Adjust buttons to increase or decrease the volume of the monitor speakers.