Filter
Top Products
DLP® Projector – User’s Manual
– 14 –
Starting and Shutting down the Projector
1.
Slide the lens cover.
2.
Connect the power cord to the projector
[A] Connect the other end to a wall out-
let. Switch [B] from on (O) to off (
— )
3.
The POWER and READY LEDs on the
projector turn on.
Turn on the connected devices.
4.
Ensure the Ready LED is on a steady
(not flashing) orange and then press the
Power button to turn on the projector.
The projector splash screen displays and
connected devices are detected.
If the connected device is a PC, press the
appropriate keys on the computer key-
board to switch the display output to the
projector. (Check the user manual of the
PC to determine the appropriate Fn key
combination to change display output.)
See “Setting an Access Password (Secu-
rity Lock)” on page 16 if Security Lock is
enabled.
5.
If more than one input device is con-
nected, press the Source button
repeatedly to switch among devices.
(DVD and HDTV are supported through
the VGA connector.)
6.
To turn off the projector, press the Power
button. The projector prepares for shut-
down and a “Wait a moment please…”
message appears.