Planar SA2311W Computer Monitor User Manual


 
7
5. The rear of this LCD display has 4 integrated 4 mm, 0.7 pitches threaded nuts.
Use the four holes (A), (B), (C), and (D) to attach the swing arm or other mounting fixture to the back of
the monitor with screws (not supplied).
6. Follow the instructions included with the mounting fixture to ensure that the monitor is safely attached.
The four threaded holes that are on the back of the panel are compliant with the VESA standard for
mounting flat-panel monitors.
7. Attach a swing arm or other mounting fixture.
Note: The wall-mount uses the 100mm x 100mm spacing standard.
Please use M 4mm x 10mm (L) Screw for this application.
A
C D
B