Planar VSS17SX-TR Computer Monitor User Manual


 
17" VitalScreen S
7
QUICK LINKS
Contents
Index
Ordering Parts
Product Information
Regulatory Compliance
Warranty
GETTING STARTED
About the Display
Unpack Display
Identify Components
Adjust Orientation/View
INSTALLING THE DISPLAY
Connect Power
Connect Video
Connect Audio
Connect Touch Screen
Power Management System
USING THE CONTROLS
Overview
Hot Key Functions
OSD Menu
Function Menus
APPENDIXES
Technical Information
Supported Timing
Troubleshooting
Connect the Video Cable
1 Turn off your computer and display before connecting the two units.
2 Plug the video cable into the D-sub VGA connector port on the back panel.
3 Plug the other end of the cable into the VGA port on the computer.
4 Make sure the cable are properly aligned, then tighten the connecting screws
to ensure a secure connection.
5 Turn on the display first and then the computer.
IN OPERATION: Blank screen?
Check the LED indicator on the
display. If it is steady green, but you
have no image on the screen, check
that all connections are secure and
the power is on. If the problem still
exists, call customer support for
assistance.