Filter
Top Products
5
Rear Panel
Rear panel Port and Button Denition
Port Description
Reset
● Reboot router: press the reset button for less than 5
seconds, and it will keep your original congurations.
● Load factory default setting: press the reset button
for longer than 5 seconds and the router will reset
itself to the factory default settings
(Warning! your original congurations will be replaced
with the factory default settings)
Power Power connector with 12V DC 1A.
WPS Button
Wi-Fi Protected Setup (WPS) is the simplest way to
build connection between wireless network clients and
this ADSL router. Press this button on the router and
enable WPS function of the wireless clients, the router
and clients will automatically congure the security key
and connect directly. Please note that the router will
wait for WPS requests from wireless clients in 2 minutes
after the WPS button is pressed.
LAN1-4
Router is successfully connected to a device through
the corresponding port (1, 2, 3, or 4). If the LED is
ashing, the Router is actively sending or receiving data
over that port.
ADSL
Connector
The RJ-11 connector allows data communication
between the modem and the ADSL network through a
twisted-pair phone wire.