Filter
Top Products
3.1.4 Replace longer and shorter bracket step
Replace bracket A step (For cabinet depth 828 ~ 1000 mm):
1. Loose (Not remove) seven rear screws.
2. Release six screws.
3. Take rear bracket out.
original bracket
4. Adjust rail and input bracket A to rear of the rail then adjust bracket A to fit your
cabinet. Install 2~3 screws (don’t tight-up) upon the length you need. One is
forbidden.
bracket A
4. Repeat step 1 ~ 4 for the other side.
5. Repeat step 3 ~ 10 of install console to finish installation.
14