Filter
Top Products
EV-401M / EV-401S User's Manual
17
Water or moisture can not enter the unit
Air flow around the unit and through the vents in the
side of the case is not restricted (company
recommend that you provide a minimum of 25mm
inch clearance)
To prolong the operational life of your units:
Do not place objects on top of any unit or stack
Do not obstruct any vents at the sides of the case
3.4 Installing Network Cables
After placing the converter on the desktop, then we need to
know how to connect the device to network.
3.5 Station Connections with Telephone Wires
Connect the network adapters in stations to the converter’s
10/100Mbps switching ports through category 3, 4 or 5
UTP cables. There are two RJ11 phone jacks, one for
telephone set connection and the other one is used for
phone line network connection. If you have telephone wall
jacks at home then all you need to do is connecting the
RJ11 network port to the wall jack through telephone wires.
Warning !
Connection of the RJ-45 connector from an RJ-11 to TNV
circuits can cause permanent damage to the device.