Filter
Top Products
11
2.2.1 Desktop Installation
To install the Fast Ethernet Switch on desktop, simply follow the next
steps:
Step 1: Attach the rubber feet to the recessed areas on the bottom
of the Fast Ethernet Switch.
Step 2: Place the Fast Ethernet Switch on desktop near an AC power
source.
Step 3: Keep enough ventilation space between the Fast Ethernet
Switch and the surrounding objects.
Note
When choosing a location, please keep in mind the
environmental restrictions discussed in Chapter 1,
Section 1.4 Product Specifications.
Step 4: Connect your Fast Ethernet Switch to network devices.
A. Connect one end of a standard network cable to the
10/100 RJ-45 ports on the front of the Fast Ethernet
Switch.
B. Connect the other end of the cable to the network devices
such as printer servers, workstations or routers…etc.
Note
Connection to the Fast Ethernet Switch requires UTP
Category 5 network cabling with RJ-45 tips. For more
information, please see the Cabling Specification in
Appendix A.
Step 5: Supply power to the Fast Ethernet Switch.
A. Connect one end of the power cable to the Fast Ethernet
Switch.
B. Connect the power plug of the power cable to a standard
wall outlet.
When the Fast Ethernet Switch receives power, the Power LED should
remain solid Green.