Filter
Top Products
16
Step 2: Carefully slide in the module until it is fully and rmly
tted into the slot of the chassis.
Figure 2-1: Insert a media converter into an available slot
Step 3: Attach a rack-mount bracket to each side of the Chassis
with supplied screws attached to the package.
Step 4: After the brackets are attached to the chassis, use
suitable screws to securely attach the brackets to the
rack, as shown in Figure 2-2.
Step 5: Proceed with the steps 4 and steps 5 of session
6.1
Stand-alone Installation to connect the network
cabling and supply power to your chassis.
Caution
You must use the screws supplied with the
mounting brackets. Damage caused to the parts
by using incorrect screws would invalidate your
warranty.