Filter
Top Products
13
Per SFP Interface
LED Color Function
SFP
LNK/
ACT
Green
Lights to indicate that the Switch is successfully
connecting to the network at 1000Mbps through
SFP interface.
Blinks to indicate the Switch is receiving or
sending data.
2.1.4 Switch Rear Panel
Figure 2-4 & 2-5 shows a rear panel of Gigabit Ethernet Switch.
Figure 2-4 GSW-1601/GSW-2401 rear panel
Figure 2-5 GSW-2416 rear panel
Power Notice:
1. The device is a power-required device, it means, it will not work till
it is powered. If your networks should active all the time, please
consider using UPS (Uninterrupted Power Supply) for your device. It
will prevent you from network data loss or network downtime.
2. In some area, installing a surge suppression device may also help to
protect your Gigabit Ethernet Switch from being damaged by unregu-
lated surge or current to the Switch or the power adapter.
2.2 Installing the Switch
This part describes how to install your Gigabit Ethernet Switch and
make connections to it. Please read the following topics and perform
the procedures in the order being presented.