Filter
Top Products
31
4. 5V DC Jack
The input power is 5V DC.
Note
1. ONLY use package power adapter supplied with the
internet. Otherwise, the product may be damaged.
2. Please DON’T plug DC 12V power into the power jack,
that will damage your IVS-H120.
2.8.3 IVS-H120 Installation
1. Attach video source to IVS-H120
To use IVS-H120, user must supply video source to IVS-H120. Connect
the BNC terminal of camera to the IVS-H120’s video input and make
sure to power on camera rst.
2. Attach Audio source to IVS-H120 (option)
If user needs not only video stream but also audio stream, then the
audio source should be attached to IVS-H120. Connect the audio
device’s line output to the IVS-H120’s MIC-in and make sure to power
on your camera or audio device rst.
3. Plug-in Ethernet cable into RJ-45 connector
Connect an Ethernet cable to the LAN socket located on the IVS-H120’s
panel and attach it to the network.
4. Connect RS-485 D+ and D- (option)
When users would like to apply a camera with P/T/Z function, they
usually need to connect their communication port (for camera control)
through RS-485. After RS-485 was correctly connected to D+ and D-,
the remote users could control the camera movement through internet.
5. Connect the attached power adapters to IVS-H120 and plug-in
adapter into power outlet
6. Done