Filter
Top Products
2.3 Connecting Digital Outputs
The
IP Power Manager
provides two digital
outputs (NO by default) to
which
you can
connect indicators
or other output devices that are
normally
open (NO) or
normally
closed
(NC). The digital output connectors are work as a switch to let you switch the connected
device On or Off. The connectors will not provide power to the connected device. So the
connected device should connect with its power adapter. You can
control the digital outputs
remotely through the console or over the LAN.
2.4 Connecting EMD
- 7 -
An environmental monitoring device that is
sensors connected to
for
detecting
temperature,
humidity, water
level,
and so on can be connected to the
IP Power Manager
with
the console
port.
The
EMD can also be
connected
to alarms
or indicators and controlled through the
IP
Power Manager
. Connect the EMD to
the console port as shown: