Filter
Top Products
7. To set the outgoing frames are VLAN-Tagged frames or untagged. Then click .
Tag: outgoing frames with VLAN-Tagged.
Untag: outgoing frames without VLAN-Tagged.
4.10.2.2 Port VID: Configure port VID settings
1. Port VLAN ID: enter the port VLAN ID.
2. Click
.
3. To reset back to default value, click
button.
802.1q VLAN - Port VLAN ID interface
[NOTE] Remember to execute the "Save Configuration" action, otherwise the new configuration will lose
when the switch power off.
4.11 Alert
There are three kinds of alert - e-mail, event, and power alarm. You can configure each alert function, as
you needed.
4.11.1 E-mail Alert Configuration
When the specific events occur, the system will send the alert to the email account that is assigned by