Filter
Top Products
4.7 Setup Menu - Media Screen
This screen allows you to configure the settings for media functions.
Enable iTunes
Server
If enabled, then the user can listen music that stored in the NAS via
iTunes client. This iTunes Server supports files with
extensions .mp3, .m4a, and .m4p. And the iTunes Server uses port
number 3689.
Server Name Specify the name of the iTunes Server.
Content Directory Specify the location in which music need be served iTunes Server.
Enable MP3
Broadcast
If enabled, then the NAS will broadcast MP3 in specified folder, and user
can listen to them by music players such as WinAMP etc. This MP3
Broadcast supports files with extension .mp3.
Server Name Specify the name of the MP3 Broadcast.
Port
This port number is used for HTTP connections to MP3 Broadcast.. The
default is 1234.. If this is changed, you should use a number greater than
1024. In order to connect to the music broadcast via WinAMP etc, need
add a ":" and the port number after the address, e.g.:
HTTP://192.168.0.100:1234
This example assumes the NAS's IP Address is 192.168.0.100, and the
port number is 1234.
41