Filter
Top Products
Security Button
This section describes how to use Security button for configuration in the
following situations:
z Establish a new security network (Network AB)
The procedure is as follows:
1. Press the security button on the adapter (a) during 1~3 seconds.
2. Press the security button on the adapter (b) during 1~3 seconds.
3. The PWR LEDs start to flash.
4. After a few seconds, the PWR and HP LEDs should be on. The connection of
Network AB is success.
z Use random value of security network (Network AB)
1. Press the security button on adapter (a) more than 10 seconds until all LEDs
off.
2. Press the security button on adapter (a) during 1~3 seconds.
3. Press the security button on adapter (b) during 1~3 seconds.
4. The PWR LEDs start to flash.
5. After a few seconds, the PWR and HP LEDs should be on. The connection of
Network AB is success.
z Establish adapter (c) to join an existing network (Network AB).
16