Filter
Top Products
1
1. INTRODUCTION
1.1 Package Contents
Check the contents of your package for following parts:
● IEEE 802.3af Power over Ethernet Injector Hub x1
● User’s Manual x1
● Quick installation guide x1
● 19” rack mounting kit x1
● Power cord x1
● Rubber feet x 4
If any of these are missing or damaged, please contact your dealer immediately, if possible, retain the carton including the
original packing material, and use them against to repack the product in case there is a need to return it to us for repair.
1.2 Product Description
The PLANET POE-1200 / POE-2400 are 12 / 24-Port IEEE 802.3af Power over Ethernet Mid-Span injector hub complies
with IEEE 802.3, IEEE 802.3u and IEEE 802.3af standards. It is equipped with 12 / 24 10/100Base-TX Fast Ethernet ports
that support full 48VDC power for any remote IEEE802.3af powered device (PD) like Wireless LAN Access Point, IP phone,
LAN Camera or any other network devices. With support for 130 / 260 watts power supply, POE-1200 / POE-2400 should
provide the sufficient power to the 12 / 24 remote devices.
The POE-1200 / POE-2400 is installed between a regular Ethernet switch and the powered devices, injecting pow
er without
affecting the data transmit. It offer a cost effective solution and quickly way to upgrade network system to IEEE 802.3af
Power over Ethernet, without replace the existing Ethernet switch.
There are 24 / 48 RJ-45 STP ports on the front panel of hub, 12 / 24 of them on lowe
r stack are "Date" port and the other 12
/ 24 ports on upper stack are "Data + Power output" port. Each of the "Data + Power output" port on upper stack functions
as an injector which inserts DC Voltage into the CAT 5 cable allowing the cable between the Injector and Splitter to transfer
data and power simultaneously.
To manage your powered devices, POE-1200 / POE-2400 provides both Web management interfaces in wh
ich
administrators can manage functions such as port Enable/Disable, port priority, system configuration, and
Username/Password changing and with smart feature for powered device, the Hub can auto detect the power status on
each port and show massages Web management interface. These features also provide a cost-effective way to manage
the devices from Internet whenever you are at work or at home.
Power over Ethernet Applications
For the places hard to find the power outlet, it provides the easiest way to power your Ethernet devices such as PLANET
Internet Cameras and outdoor Wireless Access Point installed on the top of the building.
To control the power system of your networking devices, they can directly
co-work with PoE IP Phone to build VoIP
telephony network in the office. Besides, it can be directly deployed to connect the third party 802.3af devices like wireless
AP and PoE switches installed 100 meters away.