Filter
Top Products
3.5.7.1 Static Route
The static routing function determines the path that data follows over your network
before and after it passes through your router. You can use static routing to allow
different domain users to access the Internet through this Router.
To setup Static Routing, click on the Static Routing link in the left navigation bar,
show as below.
The screen contains the following details:
Filed Description
Interface Select the direction of WAN or LAN.
Destination IP Enter the IP Address of routing entry.
Subnet Mask Enter the Subnet Mask of routing entry.
Gateway Enter the Gateway address of routing entry.
z Click “Add” to add the information that has been entered.
z Click “CANCEL” to exit from this page without saving the changes.
Example:
43