Planet Technology VIP-280 Network Router User Manual


 
Chapter 4
VoIP Configurations
VIP-280 Status
This page main display the current and last time VoIP call status & result.
Parameter Description
PC Time
will show the date & time that your connected PC now.
Gateway Time
will show the date & time of this VoIP router, the date amd time is get
from SNTP server. You may setting the SNTP server from “System
Config Administrator Date & Time”
Ports Message
Port
display FXS interfase the port number.
Type
Telephone interface type:
FXS: for connect to regulate phone set.
Display Name
display the remote party name of this VoIP call.
Status
Current status of this port.
Idle
Standby make phone call.
Signal
Waiting for DTMF key in or VoIP protocol connecting.
In
There is a phone call made from phone port and call out to Network by
VoIP.
Out
There is a phone call made from network VoIP and pick up by phone
set.
Connected IP
The other party IP of this VoIP call.
Caller ID
Caller ID received from phone port.
Start Time
Date & time of this VoIP call begin on this port.
End Time
Date & Time of last VoIP call End on this port.
Talking Sec
Total talked seconds of last VoIP call on this port.
Dialed number
On the VoIP call out (line status display In), This will display the real dial
out number for VoIP call.
On the VoIp call in (line status display out). This will display the number
will dial out to phone line.
Release by
This will display the reason of this call termination.
4
15