Filter
Top Products
Parameter Description
AP MAC Address You have to enter the MAC addresses of another WAP-4030A that it will connect to.
Mode
802.11b mode: It allows to select the transmit rate up to 11Mbps
802.11g mode: It allows to select the transmit rate up to 54Mbps
Mixed mode: It provides best performance for 11g transmission when you enable
the AP mode selection to “Mixed mode”.
Channel Please select the same channel on both WAP-4030A.
Security
Disable: Disable the security function.
WEP: WEP is an authentication algorithm, which protects authorized Wireless LAN
users against eavesdropping. The Authentication type and WEP key of wireless
stations must be the same with the Access Point. This Access Point supports
64/128-bit WEP Encryption function. With this function, your data will be transmitted
over the wireless network securely. Please refer to section 3.5 to configure.
Advance setting It provides more powerful features for you to configuring. Please refer to section
3.1.4.1.
Please click “Apply” button to save the above configurations.
2
0