Filter
Top Products
3.8 Advanced Settings
The WL-8315 provides more advanced parameters in Windows Device Manager. You can find the
Advanced configuration following the step A to D in section 3.7. Please check below to know the
function of the settings.
Note: The chipset manufacturer reserves those functions in red for future use. Those options are not
effective on WL-8315.
Function Description
AdHoc Wireless Mode Select B/G mixed or Pure B mode
Auto Channel Select Not applicable on WL-8315.
Auto Reconnect Mode Auto connecting to AP when disconnected.
B/G protection
To avoid collision when B mode station and G mode station exist
concurrently.
CAM when AC power When use AC power, it doesn't enter into sleep mode.
Country Region 11A Not applicable on WL-8315.
Country Region 11G Supporting 11G Channel for different country.
Frame Threshold To enhance throughput when traffic is high.
Frame Aggregation To ehhance throughput when traffic is low.
IEEE 802.11h Not applicable on WL-8315.
Local Administration MAC...
Using different MAC address if wanted. This MAC address will not
write to EEPROM. It is only used in run time.
Network Type Selecting Infrastructure or AdHoc mode.
Power Saving Mode Selecting different power mode.
Radio On/Off RF switching.
RTS threshold To prevent hidden node.
SSID AP's broadcast name.
WMM capable Please refer to section 3.7.
25