Filter
Top Products
5
Installing the Access Point
Power Socket LAN Port
SMA Connectors
Connect bundled antenna to the two SMA connectors.
Connect the LAN PC or network devices to WNAP-1120 LAN port with
RJ-45 Ethernet cables.
Connect power adapter to the power socket on WNAP-1120, and plug
the other end of the power pack into an electrical outlet.
After hardware connection is done, please refer to below for the
conguration.
Note
ONLY use the power adapter supplied with WNAP-1120.
Otherwise, the product may be damaged.
l
l
l
l