Filter
Top Products
7
6. On this page, you can set the Radio Band, Mode, SSID and Channel
to your WRT-416. The SSID is to identify your wireless network. All
the devices (AP and wireless client) on the same wireless network
must be congured to the same SSID. You can leave the Radio Band
and Channel settings to default. On the Mode Settings, the default
is AP mode which allow your wireless client to connect each other
and the wired Ethernet network. Please refer to the user’s manual
for detial on other available modes.
Click “Next” to proceed.
7. You have nished all basic congurations for WRT-416. Please press
“Exit” to close this window. The WRT-416 will perform reboot if major
changes are made. After reboot completes, the WRT-416 is ready to
use.