Filter
Top Products
Attaching Displays
FX 5800, FX 5600, FX 5600G, FX 4600, FX 4600G, FX 4700 X2, FX 3700, FX 1700, FX 570, FX 380, FX
370
These boards feature dual DVI-I connectors (the FX 4700 X2 features four DVI-I connectors). These
connectors support:
▪ Single or dual digital displays (up to 4 on the FX 4700 X2)
▪ Single or dual analog displays (up to 4 on the FX 4700 X2) using supplied DVI-I to VGA adapters
▪ Mixed digital and analog displays
▪ Stereo 3-pin connector (not available on the FX 1700, FX 570, FX 380, FX 370, or FX 370 LP)
▪ G series boards also support Frame lock and Genlock via two RJ45 connectors and house sync via a
BNC connector
▪ SDI series boards utilize a DVI crossover cable, consequently the number of available DVI-I ports is
reduced by one and include a SMA to BNC adapter kit for SDI output
▪ Professional Video Edition series boards include HD or SD component video output or SD S-video or
composite output via a 9-pin connector and the PNY Professional Video Breakout box
Typical Quadro board showing location of DVI-I connectors on the mounting bracket. A stereo connector (if
supported by your board) will be located above the upper DVI-I connector
FX 4800, FX 3800, FX 1800, and FX 580
These boards have a single dual-link DVI-I connector and two DisplayPort connectors. Although this gives a
total of three output connectors only two can be used at the same time. To this end a single DisplayPort to
DVI-I adapter is included to allow use of the DVI-I port and a single DisplayPort connector (if connecting to a
DVI-D single link compatible display).
FX 370 Low Profile
This board has a single DMS-59 connector which can drive two digital or analog displays, for a total of 4. A
DMS-59 to dual DVI-I ‘Y’ adapter cable is included with your FX 370 Low Profile professional graphics
board. Two DVI-I to VGA adapters are supplied to accommodate analog displays.
NVS 440 x16 and NVS 440 x1
These boards feature dual DMS-59 connectors. Each DMS-59 port can drive two digital or analog displays,
for a total of 4. These cards ship with two (2) DMS-59 to dual VGA ‘Y’ adapter cables. DMS-59 to dual DVI-
I ‘Y’ adapter cables are available at additional cost (PNY PN 91004086-T. Visit the PNY website at
www.pny.com for additional information.
- 6 -