Filter
Top Products
22
Troubleshooting
Problem Possible Solution
No picture. Make sure the power cord is connected
securely.
Turn on the power of the PDP.
Check DVI cable connections.
Cannot see any information Turn off AC power of the PDP and the
on the display (OSD and video) video input source and turn on again.
and the power LED is blue.
No color. Press MODE to select the desired Picture
Mode.
Color is not correct, Adjust the Picture Mode options in the
Dark picture. Video menu.
_____________________________________________________________
Remote control does not The batteries could be weak. Replace the
operate. batteries.
Check the polarity of the batteries.
Press the TV button.
Point the remote control at the remote control
sensor of the PDP.
Install the PDP away from fluorescent lights.
For service, support and warranty information, visit www.polaroidelectronics.com
or in the US call
1-866-289-5168, in Canada call 1-866-301-7922 and in Mexico call 01-800-400-2443.
“Polaroid” is a registered trademark of Polaroid Corporation of Waltham, MA USA and licensed for
use on the PLA-4260MTR to Petters Consumer Brands, LLC.