Filter
Top Products
PERFORMANCE
OVERALL FREQ. RESPONSE 20Hz-27kHz
FREQ. RESPONSE -3DB LIMIT 35Hz-27kHz
ANALOG AUDIO SIGNAL
VOLTAGE INPUT (LINE-LEVEL) FULL OUTPUT 2V RMS
AMPLIFIER SNR > 90DB
FIRMWARE UPGRADABLE YES
MID-BASS DRIVER 1–6.5"(16.5CM) MINERAL POLYPROPYLENE
CONE, RUBBER SURROUND;
WOOFER 1–6.5"(16.5CM) AERATED POLY-
PROPYLENE CONE WITH 1.5" VOICE COIL
TWEETER 1" (2.5CM) RING RADIATOR IN SWIVEL MOUNT
OUTSIDE DIMENSIONS 8 1/2"X 20 7/8" (21.59CM X 53.04CM)
CUTOUT DIMENSIONS 7 1/4" X 19 1/4" (18.42CM X 48.90CM)
MOUNTING DEPTH (WITH 1/2" DRYWALL) 3 1/16" (7.78CM)
INSTALLED WEIGHT 8.7 LBS (3.9kg)
SHIPPING WEIGHT 11.6 LBS (5.3kg)
POWER CONTINUOUS RATINGS
200W speaker with < 0.5% THD+N (25W tweeter 4 Ohms, 75W mid
8 Ohms, 100W woofer 8 Ohms)
POWER REQUIREMENTS PER SPEAKER
VOLTAGE INPUT 48VDC
CURRENT DRAW 4.5A MAXIMUM
LC265i-IP Specifications
www.PolkAudio.com / 800.377.7655 (USA & Canada) / 410.358.3600 (Worldwide) 3
LC80i-IP Specifications
PERFORMANCE
OVERALL FREQ. RESPONSE 25Hz-27kHz
FREQ. RESPONSE -3DB LIMIT 40Hz-27kHz
ANALOG AUDIO SIGNAL
VOLTAGE INPUT (LINE-LEVEL) FULL OUTPUT 2V RMS
AMPLIFIER SNR > 90DB
FIRMWARE UPGRADABLE YES
MID-BASS DRIVER 1–8"(20.3CM) COMPOSITE POLYPROPYLENE
CONE, RUBBER SURROUND
TWEETER 1"(2.5CM) RING RADIATOR IN SWIVEL MOUNT
OUTSIDE DIMENSIONS 10 3/4" DIA (27.3CM)
CUTOUT DIMENSIONS 7 3/8" DIA (18.7CM)
MOUNTING DEPTH (WITH 1/2" DRYWALL) 6 15/16" (17.6CM)
INSTALLED WEIGHT 4.8 LBS (2.2kg)
SHIPPING WEIGHT 6.8 LBS (3.1kg)
POWER CONTINUOUS RATINGS
100W speaker with < 0.5% THD+N (25W tweeter 4 Ohms, 75W mid
4 Ohms)
POWER REQUIREMENTS PER SPEAKER
VOLTAGE INPUT 48V OR 28VDC
CURRENT DRAW 2.3A
@ 48V, OR
3.8A @ 28V MAXIMUM
INHERENT DELAY
INHERENT DELAY FOR EACH SPEAKER IS:
-2.5 MILLISECONDS -4.4 MILLISECONDS
ANY OTHER DELAY IS FROM THE MULTI-ROOM AUDIO VISUAL (MRAV).
PROTECTION CIRCUITRY
Thermal, short-circuit, current overdraw,
clipping compresser/limiter, reverse polarity
CONTROLS AND ADJUSTMENTS
(Performance Optimization Wizard Program)
COMPUTER REQUIREMENTS
OPERATING SYSTEM WINDOWS XP
USB PORT 5-WIRE USB 1.1 CONNECTOR
HARD DRIVE 5 MEGABYTES
REQUIRED SPEAKER CONNECTIONS
TO CONNECT YOUR COMPUTER TO THE SPEAKER, YOU HAVE TWO OPTIONS:
1. USB PORT (ANALOG USE ONLY)
2. ETHERNET JACK WITH NETWORK DECODER CARD (SOLD SEPARATELY).
LC265i-IP and LC80i-IP Specifications