Polycom 1416 8711 Server User Manual


 
1–1
1
Call Hold and Call Transfer
This guide describes how put a call on hold and how to transfer a call on your
handset when operating on a SIP call handler and when supported on KIRK
Wireless Server 600v3.
The guide is intended for end users and provides information about activating
call hold and call transfer on your handset specific for your call handler.
Contact your system administrator for informaton about your call handler and
wireless server.
For more information about the handset in general, refer to the Handset User
Guide.
This section includes information about activating:
“Call Hold” on page 1-1
“Call Transfer” on page 1-1
Call Hold
Use this feature to hold a call. A call may be placed on hold, in which case the
connection is not terminated but no verbal communication is possible until the
call is removed from hold.
On your handset, do the following:
While on call, press R. The call is now on hold.
Call Transfer
Use this feature to transfer a call to another handset by dialing a new
number/extension. The transferred call can be either attended, semi-attended
or blind. If the transferred call is attended, the desired number/extension is
notified of the impending transfer (the caller is put on hold). If the transferred