Filter
Top Products
15
32 In the Fast Configuration Wizard - System Flags dialog box, enter the
following information
:
These flags can be modified later, if required, via the Setup menu’s
System Configuration option. For more information, see the
RMX 1500/2000/4000 Administrator’s Guide, "System Configuration”
on page 18-5.
Flag Value
Conference ID
Length (MCU)
The number of digits of the Conference ID that will be
assigned by the MCU.
Range: 2-16 (Default: 5)
Note: Selecting 2 digits limits the number of
simultaneous ongoing conferences to 99.
Minimum
Conference ID
Length (User)
The minimum number of digits that
the user must enter when
manually assigning a numeric ID
to a conference.
Range: 2-16 (Default: 4)
Selecting 2
digits limits the
number of
simultaneous
ongoing
conferences to
99.
Maximum
Conference ID
Length (User)
The maximum number of digits
that the user can enter when
manually assigning a Numeric ID
to a conference.
Range: 2-16 (Default: 8)
MCU Display Name The MCU name that appears at the endpoints.
Default: Polycom RMX 2000
Terminate
Conference when
Chairperson Exits
Yes/No (Default: Yes)
Auto Extend
Conferences
When Yes is selected (default) allows conferences
running on the RMX to be automatically extended as
long
as there are participants connected and there are
available resources.