Filter
Top Products
Configuring KIRK Wireless Server 300
4–2
1 Open a web browser.
2 In the browsers Address bar, type http://192.168.0.1, and then press
ENTER.
The KWS300 Administration Page appears.
Figure 4-1 Main page of the Administration Page for KWS300
Entering a System User Name and Password
First time you access the Administration Page, you need to log on with user
name and a password.
Configuring a KIRK Wireless Server 300 Using Static IP
Address
This section describes how to configure a KWS300 using static IP address.
For information on accessing the web based Administration Page, refer to
“How to Access the Administration Page” on page 4-1.
This section contains information about:
Note
The default user name of the system is admin and the default password of
the system is kws300. It is strongly recommended to change the password,
please refer to “Security Configuration”
on page 4-5.
Note
The KWS300 is pre-configured to use a static IP address. It is strongly
recommended to configure the KWS300 using static IP address.