Filter
Top Products
Configuring KIRK Wireless Server 300
4–3
• “General Configuration” on page 4-3
• “Wireless Server Configuration” on page 4-4
• “SIP Configuration” on page 4-6
General Configuration
On the Configuration/General page you define IP, DNS and NTP settings for
the KWS300.
Click Configuration, and then click General.
Figure 4-2 Adm. Page KWS300: Configuration/General page
Table 4-1 General Configuration of the KWS300
Field Explanation Required Optional
General Configuration - IP
Use Static IP
Address
Enable the field. It is possible to configure a
KWS300 using DHCP, however it is strongly
recommended to use static IP address
x
IP Addr Enter the IP address of the KWS300 x
Netmask
Enter a new network mask. Contact you
system administrator for more information.
x
Gateway
Enter the IP address of the default gateway.
The default gateway serves as an access
point to another network. Contact your
system administrator for more information.
x