Filter
Top Products
Configuring KIRK Wireless Server 300
4–4
Click Save to save your general configuration data.
Wireless Server Configuration
On the Configuration/Wireless Server page you configure the KWS300 to
allow subscription. If the system does not allow subscription, it is not possible
to subscribe a handset.
Click Configuration, and then click Wireless Server.
Figure 4-3 Adm. Page KWS300: Configuration/Wireless Server page
Click Save to save the handset subscription configuration.
Field Explanation Required Optional
MTU
(Maximum
Translation
Unit)
Enter the size of the largest packet, that your
network protocol can transmit
x
General Configuration - DNS (Domain Name System)
Domain
Enter the name of the domain where system
belongs.
x
Primary
Server
Enter the IP address of the Primary DNS
server
x
Secondary
Server
Enter the IP address of the Secondary DNS
server
x
General Configuration - NTP (Network Time Protocol)
Server
Enter the address of the NTP server from
which the system will obtain the current time
x
Time Zone Select the time zone x
Table 4-1 General Configuration of the KWS300
Table 4-2 Configuration of the KWS300 to Allow Handset Subscription
Field Explanation Required Optional
Subscription
Allowed
Enable the check box. If not enabled, it
is not possible to subscribe a handset
x