Filter
Top Products
4
The RMX Web Client is displayed and the Product Activation
dialog box appears with the RMX serial number already filled in.
3 In the Activation Key box, enter the number that retrieved from the
PRC website or paste it (if you copied it).
4 Click OK.
The Fast Configuration Wizard appears.
Configuring the IP Network Service
The default IP Network Service defines the properties of the IP network
used for connecting IP endpoints to the MCU. The Fast Configuration
Wizard automatically opens when the system detects that the default IP
Network service was not defined.
1 In the Fast Configuration Wizard - IP dialog box, define the following
parameters:
2 Click Next.
3 In the Fast Configuration Wizard - Routes dialog box, enter the IP
address of the default router.
Field Description
IP Service
Name
Use the default name (Default IP Service) or enter a name
using up to 20 characters.
Note: This field is displayed in all dialog boxes.
Signaling Host
IP Address
Enter the IP address of the Central Signaling host. This is
the address used by endpoints for dialing in to the MCU.
MPM 1 IP
Address
Enter the IP addresses of the Media Boards. The
Signaling Host connects endpoints to the Media
Processors via these addresses.
MPM 2 IP
Address
Subnet Mask Enter the subnet mask of the MCU.
Default value: 255.255.255.0.