Filter
Top Products
Polycom RMX 2000 Hardware Guide
1-19
5 Carefully slide the MPM Module out through the front panel.
6 On the card to be installed, move the ejector levers to their fully open
position.
7 Slide in the replacement MPM Module.
8 Push the MPM Module firmly into the Backplane, making sure it is
properly seated in its slot.
9 Ensure that the metal ejector levers are fully retracted into their
housings.
10 Tighten the captive screws on the front panel of the RMX that secure
the MPM Module.
1