![](http://pdfasset.owneriq.net/3/e4/3e4fd578-3192-a554-a93a-c0e97ed77100/3e4fd578-3192-a554-a93a-c0e97ed77100-bg2.png)
DOC2153A RSS 2000 Getting Started guide + Corrections- V1.0.1.002.doc.1.002
Page 2
Unpacking and Installing the RSS 2000
1 Place the RSS 2000 unit on a stable flat surface in the selected location.
2 To connect to the power source, insert the power cable into the
Power connector on the rear panel of the MGC+ unit and insert the
Power cable into the power source socket.
3 Connect the lan cable to LAN1 in the back of the system.
4 Turn on the power switch.